No. Time Source Destination Protocol Info 3584 21:34:38.417803 IntelCor_63:57:6c Broadcast IEEE 802.11 Probe Request, SN=1404, FN=0, Flags=........, SSID="Forty-Two" Frame 3584 (92 bytes on wire, 92 bytes captured) Arrival Time: Dec 6, 2011 21:34:38.417803000 [Time delta from previous captured frame: 0.488659000 seconds] [Time delta from previous displayed frame: 28.860349000 seconds] [Time since reference or first frame: 28.860349000 seconds] Frame Number: 3584 Frame Length: 92 bytes Capture Length: 92 bytes [Frame is marked: False] [Protocols in frame: radiotap:wlan] Radiotap Header v0, Length 13 Header revision: 0 Header pad: 0 Header length: 13 Present flags: 0x00028004 .... .... .... .... .... .... .... ...0 = TSFT: False .... .... .... .... .... .... .... ..0. = Flags: False .... .... .... .... .... .... .... .1.. = Rate: True .... .... .... .... .... .... .... 0... = Channel: False .... .... .... .... .... .... ...0 .... = FHSS: False .... .... .... .... .... .... ..0. .... = DBM Antenna Signal: False .... .... .... .... .... .... .0.. .... = DBM Antenna Noise: False .... .... .... .... .... .... 0... .... = Lock Quality: False .... .... .... .... .... ...0 .... .... = TX Attenuation: False .... .... .... .... .... ..0. .... .... = DB TX Attenuation: False .... .... .... .... .... .0.. .... .... = DBM TX Attenuation: False .... .... .... .... .... 0... .... .... = Antenna: False .... .... .... .... ...0 .... .... .... = DB Antenna Signal: False .... .... .... .... ..0. .... .... .... = DB Antenna Noise: False .... .... .... .... .0.. .... .... .... = RX flags: False .... .... .... .0.. .... .... .... .... = Channel+: False 0... .... .... .... .... .... .... .... = Ext: False Data Rate: 1.0 Mb/s IEEE 802.11 Probe Request, Flags: ........ Type/Subtype: Probe Request (0x04) Frame Control: 0x0040 (Normal) Version: 0 Type: Management frame (0) Subtype: 4 Flags: 0x0 .... ..00 = DS status: Not leaving DS or network is operating in AD-HOC mode (To DS: 0 From DS: 0) (0x00) .... .0.. = More Fragments: This is the last fragment .... 0... = Retry: Frame is not being retransmitted ...0 .... = PWR MGT: STA will stay up ..0. .... = More Data: No data buffered .0.. .... = Protected flag: Data is not protected 0... .... = Order flag: Not strictly ordered Duration: 0 Destination address: Broadcast (ff:ff:ff:ff:ff:ff) Source address: IntelCor_63:57:6c (00:24:d7:63:57:6c) BSS Id: Broadcast (ff:ff:ff:ff:ff:ff) Fragment number: 0 Sequence number: 1404 IEEE 802.11 wireless LAN management frame Tagged parameters (55 bytes) SSID parameter set Tag Number: 0 (SSID parameter set) Tag length: 9 Tag interpretation: Forty-Two: "Forty-Two" Supported Rates: 1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 Tag Number: 1 (Supported Rates) Tag length: 8 Tag interpretation: Supported rates: 1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 [Mbit/sec] Extended Supported Rates: 24.0 36.0 48.0 54.0 Tag Number: 50 (Extended Supported Rates) Tag length: 4 Tag interpretation: Supported rates: 24.0 36.0 48.0 54.0 [Mbit/sec] HT Capabilities (802.11n D1.10) Tag Number: 45 (HT Capabilities (802.11n D1.10)) Tag length: 26 HT Capabilities Info: 0x087e .... .... .... ...0 = HT LDPC coding capability: Transmitter does not support receiving LDPC coded packets .... .... .... ..1. = HT Support channel width: Transmitter supports 20MHz and 40MHz operation .... .... .... 11.. = HT SM Power Save: SM Power Save disabled (0x0003) .... .... ...1 .... = HT Green Field: Transmitter is able to receive PPDUs with Green Field (GF) preamble .... .... ..1. .... = HT Short GI for 20MHz: Supported .... .... .1.. .... = HT Short GI for 40MHz: Supported .... .... 0... .... = HT Tx STBC: Not supported .... ..00 .... .... = HT Rx STBC: No Rx STBC support (0x0000) .... .0.. .... .... = HT Delayed Block ACK: Transmitter does not support HT-Delayed BlockAck .... 1... .... .... = HT Max A-MSDU length: 7935 bytes ...0 .... .... .... = HT DSSS/CCK mode in 40MHz: Won't/Can't use of DSSS/CCK in 40 MHz ..0. .... .... .... = HT PSMP Support: Won't/Can't support PSMP operation .0.. .... .... .... = HT Forty MHz Intolerant: Use of 40 MHz transmissions unrestricted/allowed 0... .... .... .... = HT L-SIG TXOP Protection support: Not supported A-MPDU Parameters: 0x0017 .... ..11 = Maximum Rx A-MPDU Length: 65535 [Bytes] ...1 01.. = MPDU Density: 4 [usec] (0x05) 000. .... = Reserved: 0x00 Rx Supported Modulation and Coding Scheme Set: MCS Set Tag interpretation: Rx Modulation and Coding Scheme (One bit per modulation) .... .... .... .... .... .... 1111 1111 = Rx Bitmask Bits 0-7: 0x000000ff .... .... .... .... 1111 1111 .... .... = Rx Bitmask Bits 8-15: 0x000000ff .... .... 1111 1111 .... .... .... .... = Rx Bitmask Bits 16-23: 0x000000ff 0000 0000 .... .... .... .... .... .... = Rx Bitmask Bits 24-31: 0x00000000 .... .... .... .... .... .... .... ...1 = Rx Bitmask Bit 32: 0x00000001 .... .... .... .... .... .... .000 000. = Rx Bitmask Bits 33-38: 0x00000000 .... .... ...0 0000 0000 0000 0... .... = Rx Bitmask Bits 39-52: 0x00000000 ...0 0000 0000 0000 0000 0000 000. .... = Rx Bitmask Bits 53-76: 0x00000000 Highest Supported Data Rate: 0x01C2 .... .... .... ...1 = Tx Supported MCS Set: Defined .... .... .... ..0. = Tx and Rx MCS Set: Equal .... .... .... 00.. = Tx Maximum Number of Spatial Streams Supported: 1 spatial stream (0x0000) .... .... ...0 .... = Unequal Modulation: Not supported HT Extended Capabilities: 0x0000 .... .... .... ...0 = Transmitter supports PCO: Not supported .... .... .... .00. = Time needed to transition between 20MHz and 40MHz: No Transition (0x0000) .... ..00 .... .... = MCS Feedback capability: STA does not provide MCS feedback (0x0000) .... .0.. .... .... = High Throughput: Not supported .... 0... .... .... = Reverse Direction Responder: Not supported Transmit Beam Forming (TxBF) Capabilities: 0x0000 .... .... .... .... .... .... .... ...0 = Transmit Beamforming: Not supported .... .... .... .... .... .... .... ..0. = Receive Staggered Sounding: Not supported .... .... .... .... .... .... .... .0.. = Transmit Staggered Sounding: Not supported .... .... .... .... .... .... .... 0... = Receive Null Data packet (NDP): Not supported .... .... .... .... .... .... ...0 .... = Transmit Null Data packet (NDP): Not supported .... .... .... .... .... .... ..0. .... = Implicit TxBF capable: Not supported .... .... .... .... .... .... 00.. .... = Calibration: incapable (0x00000000) .... .... .... .... .... ...0 .... .... = STA can apply TxBF using CSI explicit feedback: Not supported .... .... .... .... .... ..0. .... .... = STA can apply TxBF using uncompressed beamforming feedback matrix: Not supported .... .... .... .... .... .0.. .... .... = STA can apply TxBF using compressed beamforming feedback matrix: Not supported .... .... .... .... ...0 0... .... .... = Receiver can return explicit CSI feedback: not supported (0x00000000) .... .... .... .... .00. .... .... .... = Receiver can return explicit uncompressed Beamforming Feedback Matrix: not supported (0x00000000) .... .... .... ...0 0... .... .... .... = STA can compress and use compressed Beamforming Feedback Matrix: not supported (0x00000000) .... .... .... .00. .... .... .... .... = Minimal grouping used for explicit feedback reports: No grouping supported (0x00000000) .... .... ...0 0... .... .... .... .... = Max antennae STA can support when CSI feedback required: 1 TX antenna sounding (0x00000000) .... .... .00. .... .... .... .... .... = Max antennae STA can support when uncompressed Beamforming feedback required: 1 TX antenna sounding (0x00000000) .... ...0 0... .... .... .... .... .... = Max antennae STA can support when compressed Beamforming feedback required: 1 TX antenna sounding (0x00000000) .... .00. .... .... .... .... .... .... = Maximum number of rows of CSI explicit feedback: 1 row of CSI (0x00000000) ...0 0... .... .... .... .... .... .... = Maximum number of space time streams for which channel dimensions can be simultaneously estimated: 1 space time stream (0x00000000) 000. .... .... .... .... .... .... .... = Reserved: 0x00000000 Antenna Selection (ASEL) Capabilities: 0x00 .... ...0 = Antenna Selection Capable: Not supported .... ..0. = Explicit CSI Feedback Based Tx ASEL: Not supported .... .0.. = Antenna Indices Feedback Based Tx ASEL: Not supported .... 0... = Explicit CSI Feedback: Not supported ...0 .... = Antenna Indices Feedback: Not supported ..0. .... = Rx ASEL: Not supported .0.. .... = Tx Sounding PPDUs: Not supported 0... .... = Reserved: 0x00 0000 00 00 0d 00 04 80 02 00 02 00 00 00 00 40 00 00 .............@.. 0010 00 ff ff ff ff ff ff 00 24 d7 63 57 6c ff ff ff ........$.cWl... 0020 ff ff ff c0 57 00 09 46 6f 72 74 79 2d 54 77 6f ....W..Forty-Two 0030 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c .........$2.0H`l 0040 2d 1a 7e 08 17 ff ff ff 00 01 00 00 00 00 00 c2 -.~............. 0050 01 01 00 00 00 00 00 00 00 00 00 00 ............ ================================================================================ No. Time Source Destination Protocol Info 3585 21:34:38.420272 CameoCom_f7:33:f5 IntelCor_63:57:6c IEEE 802.11 Probe Response, SN=3505, FN=0, Flags=........, BI=100, SSID="Forty-Two" Frame 3585 (201 bytes on wire, 201 bytes captured) Arrival Time: Dec 6, 2011 21:34:38.420272000 [Time delta from previous captured frame: 0.002469000 seconds] [Time delta from previous displayed frame: 0.002469000 seconds] [Time since reference or first frame: 28.862818000 seconds] Frame Number: 3585 Frame Length: 201 bytes Capture Length: 201 bytes [Frame is marked: False] [Protocols in frame: radiotap:wlan] Radiotap Header v0, Length 24 Header revision: 0 Header pad: 0 Header length: 24 Present flags: 0x0000486e .... .... .... .... .... .... .... ...0 = TSFT: False .... .... .... .... .... .... .... ..1. = Flags: True .... .... .... .... .... .... .... .1.. = Rate: True .... .... .... .... .... .... .... 1... = Channel: True .... .... .... .... .... .... ...0 .... = FHSS: False .... .... .... .... .... .... ..1. .... = DBM Antenna Signal: True .... .... .... .... .... .... .1.. .... = DBM Antenna Noise: True .... .... .... .... .... .... 0... .... = Lock Quality: False .... .... .... .... .... ...0 .... .... = TX Attenuation: False .... .... .... .... .... ..0. .... .... = DB TX Attenuation: False .... .... .... .... .... .0.. .... .... = DBM TX Attenuation: False .... .... .... .... .... 1... .... .... = Antenna: True .... .... .... .... ...0 .... .... .... = DB Antenna Signal: False .... .... .... .... ..0. .... .... .... = DB Antenna Noise: False .... .... .... .... .1.. .... .... .... = RX flags: True .... .... .... .0.. .... .... .... .... = Channel+: False 0... .... .... .... .... .... .... .... = Ext: False Flags: 0x00 .... ...0 = CFP: False .... ..0. = Preamble: Long .... .0.. = WEP: False .... 0... = Fragmentation: False ...0 .... = FCS at end: False ..0. .... = Data Pad: False .0.. .... = Bad FCS: False 0... .... = Short GI: False Data Rate: 1.0 Mb/s Channel frequency: 2412 [BG 1] Channel type: 802.11b (0x00a0) .... .... ...0 .... = Turbo: False .... .... ..1. .... = Complementary Code Keying (CCK): True .... .... .0.. .... = Orthogonal Frequency-Division Multiplexing (OFDM): False .... .... 1... .... = 2 GHz spectrum: True .... ...0 .... .... = 5 GHz spectrum: False .... ..0. .... .... = Passive: False .... .0.. .... .... = Dynamic CCK-OFDM: False .... 0... .... .... = Gaussian Frequency Shift Keying (GFSK): False ...0 .... .... .... = GSM (900MHz): False ..0. .... .... .... = Static Turbo: False .0.. .... .... .... = Half Rate Channel (10MHz Channel Width): False 0... .... .... .... = Quarter Rate Channel (5MHz Channel Width): False SSI Signal: -45 dBm SSI Noise: -127 dBm Antenna: 7 RX flags: 0x0000 .... .... .... .... .... ..0. = Bad PLCP: False IEEE 802.11 Probe Response, Flags: ........ Type/Subtype: Probe Response (0x05) Frame Control: 0x0050 (Normal) Version: 0 Type: Management frame (0) Subtype: 5 Flags: 0x0 .... ..00 = DS status: Not leaving DS or network is operating in AD-HOC mode (To DS: 0 From DS: 0) (0x00) .... .0.. = More Fragments: This is the last fragment .... 0... = Retry: Frame is not being retransmitted ...0 .... = PWR MGT: STA will stay up ..0. .... = More Data: No data buffered .0.. .... = Protected flag: Data is not protected 0... .... = Order flag: Not strictly ordered Duration: 314 Destination address: IntelCor_63:57:6c (00:24:d7:63:57:6c) Source address: CameoCom_f7:33:f5 (00:18:e7:f7:33:f5) BSS Id: CameoCom_f7:33:f5 (00:18:e7:f7:33:f5) Fragment number: 0 Sequence number: 3505 IEEE 802.11 wireless LAN management frame Fixed parameters (12 bytes) Timestamp: 0x00000001171084A9 Beacon Interval: 0.102400 [Seconds] Capability Information: 0x0411 .... .... .... ...1 = ESS capabilities: Transmitter is an AP .... .... .... ..0. = IBSS status: Transmitter belongs to a BSS .... ..0. .... 00.. = CFP participation capabilities: No point coordinator at AP (0x0000) .... .... ...1 .... = Privacy: AP/STA can support WEP .... .... ..0. .... = Short Preamble: Short preamble not allowed .... .... .0.. .... = PBCC: PBCC modulation not allowed .... .... 0... .... = Channel Agility: Channel agility not in use .... ...0 .... .... = Spectrum Management: dot11SpectrumManagementRequired FALSE .... .1.. .... .... = Short Slot Time: Short slot time in use .... 0... .... .... = Automatic Power Save Delivery: apsd not implemented ..0. .... .... .... = DSSS-OFDM: DSSS-OFDM modulation not allowed .0.. .... .... .... = Delayed Block Ack: delayed block ack not implemented 0... .... .... .... = Immediate Block Ack: immediate block ack not implemented Tagged parameters (141 bytes) SSID parameter set Tag Number: 0 (SSID parameter set) Tag length: 9 Tag interpretation: Forty-Two: "Forty-Two" Supported Rates: 1.0(B) 2.0(B) 5.5(B) 11.0(B) 6.0 9.0 12.0 18.0 Tag Number: 1 (Supported Rates) Tag length: 8 Tag interpretation: Supported rates: 1.0(B) 2.0(B) 5.5(B) 11.0(B) 6.0 9.0 12.0 18.0 [Mbit/sec] DS Parameter set: Current Channel: 1 Tag Number: 3 (DS Parameter set) Tag length: 1 Tag interpretation: Current Channel: 1 Country Information: Country Code: US, Any Environment Tag Number: 7 (Country Information) Tag length: 6 Tag interpretation: Country Code: US, Any Environment Start Channel: 1, Channels: 11, Max TX Power: 27 dBm ERP Information: no Non-ERP STAs, do not use protection, long preambles Tag Number: 42 (ERP Information) Tag length: 1 Tag interpretation: ERP info: 0x4 (no Non-ERP STAs, do not use protection, long preambles) Extended Supported Rates: 24.0 36.0 48.0 54.0 Tag Number: 50 (Extended Supported Rates) Tag length: 4 Tag interpretation: Supported rates: 24.0 36.0 48.0 54.0 [Mbit/sec] RSN Information Tag Number: 48 (RSN Information) Tag length: 20 Tag interpretation: RSN IE, version 1 Tag interpretation: Multicast cipher suite: AES (CCM) Tag interpretation: # of unicast cipher suites: 1 Tag interpretation: Unicast cipher suite 1: AES (CCM) Tag interpretation: # of auth key management suites: 1 Tag interpretation: auth key management suite 1: PSK RSN Capabilities: 0x000C .... .... .... ...0 = RSN Pre-Auth capabilities: Transmitter does not support pre-authentication .... .... .... ..0. = RSN No Pairwise capabilities: Transmitter can support WEP default key 0 simultaneously with Pairwise key .... .... .... 11.. = RSN PTKSA Replay Counter capabilities: 16 replay counters per PTKSA/GTKSA/STAKeySA (0x0003) .... .... ..00 .... = RSN GTKSA Replay Counter capabilities: 1 replay counter per PTKSA/GTKSA/STAKeySA (0x0000) HT Capabilities (802.11n D1.10) Tag Number: 45 (HT Capabilities (802.11n D1.10)) Tag length: 26 HT Capabilities Info: 0x11cc .... .... .... ...0 = HT LDPC coding capability: Transmitter does not support receiving LDPC coded packets .... .... .... ..0. = HT Support channel width: Transmitter only supports 20MHz operation .... .... .... 11.. = HT SM Power Save: SM Power Save disabled (0x0003) .... .... ...0 .... = HT Green Field: Transmitter is not able to receive PPDUs with Green Field (GF) preamble .... .... ..0. .... = HT Short GI for 20MHz: Not supported .... .... .1.. .... = HT Short GI for 40MHz: Supported .... .... 1... .... = HT Tx STBC: Supported .... ..01 .... .... = HT Rx STBC: Rx support of one spatial stream (0x0001) .... .0.. .... .... = HT Delayed Block ACK: Transmitter does not support HT-Delayed BlockAck .... 0... .... .... = HT Max A-MSDU length: 3839 bytes ...1 .... .... .... = HT DSSS/CCK mode in 40MHz: Will/Can use DSSS/CCK in 40 MHz ..0. .... .... .... = HT PSMP Support: Won't/Can't support PSMP operation .0.. .... .... .... = HT Forty MHz Intolerant: Use of 40 MHz transmissions unrestricted/allowed 0... .... .... .... = HT L-SIG TXOP Protection support: Not supported A-MPDU Parameters: 0x001b .... ..11 = Maximum Rx A-MPDU Length: 65535 [Bytes] ...1 10.. = MPDU Density: 8 [usec] (0x06) 000. .... = Reserved: 0x00 Rx Supported Modulation and Coding Scheme Set: MCS Set Tag interpretation: Rx Modulation and Coding Scheme (One bit per modulation) .... .... .... .... .... .... 1111 1111 = Rx Bitmask Bits 0-7: 0x000000ff .... .... .... .... 1111 1111 .... .... = Rx Bitmask Bits 8-15: 0x000000ff .... .... 0000 0000 .... .... .... .... = Rx Bitmask Bits 16-23: 0x00000000 0000 0000 .... .... .... .... .... .... = Rx Bitmask Bits 24-31: 0x00000000 .... .... .... .... .... .... .... ...0 = Rx Bitmask Bit 32: 0x00000000 .... .... .... .... .... .... .000 000. = Rx Bitmask Bits 33-38: 0x00000000 .... .... ...0 0000 0000 0000 0... .... = Rx Bitmask Bits 39-52: 0x00000000 ...0 0000 0000 0000 0000 0000 000. .... = Rx Bitmask Bits 53-76: 0x00000000 Highest Supported Data Rate: 0x0000 .... .... .... ...1 = Tx Supported MCS Set: Defined .... .... .... ..0. = Tx and Rx MCS Set: Equal .... .... .... 00.. = Tx Maximum Number of Spatial Streams Supported: 1 spatial stream (0x0000) .... .... ...0 .... = Unequal Modulation: Not supported HT Extended Capabilities: 0x0000 .... .... .... ...0 = Transmitter supports PCO: Not supported .... .... .... .00. = Time needed to transition between 20MHz and 40MHz: No Transition (0x0000) .... ..00 .... .... = MCS Feedback capability: STA does not provide MCS feedback (0x0000) .... .0.. .... .... = High Throughput: Not supported .... 0... .... .... = Reverse Direction Responder: Not supported Transmit Beam Forming (TxBF) Capabilities: 0x0000 .... .... .... .... .... .... .... ...0 = Transmit Beamforming: Not supported .... .... .... .... .... .... .... ..0. = Receive Staggered Sounding: Not supported .... .... .... .... .... .... .... .0.. = Transmit Staggered Sounding: Not supported .... .... .... .... .... .... .... 0... = Receive Null Data packet (NDP): Not supported .... .... .... .... .... .... ...0 .... = Transmit Null Data packet (NDP): Not supported .... .... .... .... .... .... ..0. .... = Implicit TxBF capable: Not supported .... .... .... .... .... .... 00.. .... = Calibration: incapable (0x00000000) .... .... .... .... .... ...0 .... .... = STA can apply TxBF using CSI explicit feedback: Not supported .... .... .... .... .... ..0. .... .... = STA can apply TxBF using uncompressed beamforming feedback matrix: Not supported .... .... .... .... .... .0.. .... .... = STA can apply TxBF using compressed beamforming feedback matrix: Not supported .... .... .... .... ...0 0... .... .... = Receiver can return explicit CSI feedback: not supported (0x00000000) .... .... .... .... .00. .... .... .... = Receiver can return explicit uncompressed Beamforming Feedback Matrix: not supported (0x00000000) .... .... .... ...0 0... .... .... .... = STA can compress and use compressed Beamforming Feedback Matrix: not supported (0x00000000) .... .... .... .00. .... .... .... .... = Minimal grouping used for explicit feedback reports: No grouping supported (0x00000000) .... .... ...0 0... .... .... .... .... = Max antennae STA can support when CSI feedback required: 1 TX antenna sounding (0x00000000) .... .... .00. .... .... .... .... .... = Max antennae STA can support when uncompressed Beamforming feedback required: 1 TX antenna sounding (0x00000000) .... ...0 0... .... .... .... .... .... = Max antennae STA can support when compressed Beamforming feedback required: 1 TX antenna sounding (0x00000000) .... .00. .... .... .... .... .... .... = Maximum number of rows of CSI explicit feedback: 1 row of CSI (0x00000000) ...0 0... .... .... .... .... .... .... = Maximum number of space time streams for which channel dimensions can be simultaneously estimated: 1 space time stream (0x00000000) 000. .... .... .... .... .... .... .... = Reserved: 0x00000000 Antenna Selection (ASEL) Capabilities: 0x00 .... ...0 = Antenna Selection Capable: Not supported .... ..0. = Explicit CSI Feedback Based Tx ASEL: Not supported .... .0.. = Antenna Indices Feedback Based Tx ASEL: Not supported .... 0... = Explicit CSI Feedback: Not supported ...0 .... = Antenna Indices Feedback: Not supported ..0. .... = Rx ASEL: Not supported .0.. .... = Tx Sounding PPDUs: Not supported 0... .... = Reserved: 0x00 HT Information (802.11n D1.10) Tag Number: 61 (HT Information (802.11n D1.10)) Tag length: 22 Primary Channel: 1 HT Information Subset (1 of 3): 0x00 .... ..00 = Secondary channel offset: No secondary channel (0x00) .... .0.. = Supported channel width: 20 MHz channel width only .... 0... = Reduced Interframe Spacing (RIFS): Prohibited ...0 .... = Power Save Multi-Poll (PSMP) stations only: Association requests are accepted regardless of PSMP capability 000. .... = Shortest service interval: 5 ms (0x00) HT Information Subset (2 of 3): 0x0000 .... .... .... ..00 = Operating mode of BSS: All STAs are - 20/40 MHz HT or in a 20/40 MHz BSS or are 20 MHz HT in a 20 MHz BSS (0x0000) .... .... .... .0.. = Non-greenfield STAs present: All associated STAs are greenfield capable .... .... .... 0... = Transmit burst limit: No limit .... .... ...0 .... = OBSS non-HT STAs present: Use of protection for non-HT STAs by overlapping BSSs is not needed 0000 0000 000. .... = Reserved: 0x0000 HT Information Subset (3 of 3): 0x0000 .... .... ..00 0000 = Reserved: 0x0000 .... .... .0.. .... = Dual beacon: No second beacon is transmitted .... .... 0... .... = Dual Clear To Send (CTS) protection: Not required .... ...0 .... .... = Beacon ID: Primary beacon .... ..0. .... .... = L-SIG TXOP Protection Full Support: One or more HT STAs in the BSS do not support L-SIG TXOP protection .... .0.. .... .... = Phased Coexistence Operation (PCO): Inactive .... 0... .... .... = Phased Coexistence Operation (PCO) Phase: Switch to or continue 20 MHz phase 0000 .... .... .... = Reserved: 0x0000 Rx Supported Modulation and Coding Scheme Set: Basic MCS Set Tag interpretation: Rx Modulation and Coding Scheme (One bit per modulation) .... .... .... .... .... .... 0000 0000 = Rx Bitmask Bits 0-7: 0x00000000 .... .... .... .... 0000 0000 .... .... = Rx Bitmask Bits 8-15: 0x00000000 .... .... 0000 0000 .... .... .... .... = Rx Bitmask Bits 16-23: 0x00000000 0000 0000 .... .... .... .... .... .... = Rx Bitmask Bits 24-31: 0x00000000 .... .... .... .... .... .... .... ...0 = Rx Bitmask Bit 32: 0x00000000 .... .... .... .... .... .... .000 000. = Rx Bitmask Bits 33-38: 0x00000000 .... .... ...0 0000 0000 0000 0... .... = Rx Bitmask Bits 39-52: 0x00000000 ...0 0000 0000 0000 0000 0000 000. .... = Rx Bitmask Bits 53-76: 0x00000000 Highest Supported Data Rate: 0x0000 .... .... .... ...0 = Tx Supported MCS Set: Not Defined .... .... .... ..0. = Tx and Rx MCS Set: Equal .... .... .... 00.. = Tx Maximum Number of Spatial Streams Supported: 1 spatial stream (0x0000) .... .... ...0 .... = Unequal Modulation: Not supported Vendor Specific: Microsof: WME Tag Number: 221 (Vendor Specific) Tag length: 24 Vendor: Microsof Tag interpretation: WME PE: type 2, subtype 1, version 1, parameter set 0 Tag interpretation: WME AC Parameters: ACI 0 (Best Effort), Admission Control not Mandatory, AIFSN 3, ECWmin 4, ECWmax 10, TXOP 0 Tag interpretation: WME AC Parameters: ACI 1 (Background), Admission Control not Mandatory, AIFSN 7, ECWmin 4, ECWmax 10, TXOP 0 Tag interpretation: WME AC Parameters: ACI 2 (Video), Admission Control not Mandatory, AIFSN 2, ECWmin 3, ECWmax 4, TXOP 94 Tag interpretation: WME AC Parameters: ACI 3 (Voice), Admission Control not Mandatory, AIFSN 2, ECWmin 2, ECWmax 3, TXOP 47 0000 00 00 18 00 6e 48 00 00 00 02 6c 09 a0 00 d3 81 ....nH....l..... 0010 07 00 00 00 00 00 00 00 50 00 3a 01 00 24 d7 63 ........P.:..$.c 0020 57 6c 00 18 e7 f7 33 f5 00 18 e7 f7 33 f5 10 db Wl....3.....3... 0030 a9 84 10 17 01 00 00 00 64 00 11 04 00 09 46 6f ........d.....Fo 0040 72 74 79 2d 54 77 6f 01 08 82 84 8b 96 0c 12 18 rty-Two......... 0050 24 03 01 01 07 06 55 53 20 01 0b 1b 2a 01 04 32 $.....US ...*..2 0060 04 30 48 60 6c 30 14 01 00 00 0f ac 04 01 00 00 .0H`l0.......... 0070 0f ac 04 01 00 00 0f ac 02 0c 00 2d 1a cc 11 1b ...........-.... 0080 ff ff 00 00 00 00 00 00 00 00 00 00 01 00 00 00 ................ 0090 00 00 00 00 00 00 00 3d 16 01 00 00 00 00 00 00 .......=........ 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd ................ 00b0 18 00 50 f2 02 01 01 00 00 03 a4 00 00 27 a4 00 ..P..........'.. 00c0 00 42 43 5e 00 62 32 2f 00 .BC^.b2/. ================================================================================ No. Time Source Destination Protocol Info 3586 21:34:38.421220 IntelCor_63:57:6c CameoCom_f7:33:f5 IEEE 802.11 Authentication, SN=1405, FN=0, Flags=........ Frame 3586 (43 bytes on wire, 43 bytes captured) Arrival Time: Dec 6, 2011 21:34:38.421220000 [Time delta from previous captured frame: 0.000948000 seconds] [Time delta from previous displayed frame: 0.000948000 seconds] [Time since reference or first frame: 28.863766000 seconds] Frame Number: 3586 Frame Length: 43 bytes Capture Length: 43 bytes [Frame is marked: False] [Protocols in frame: radiotap:wlan] Radiotap Header v0, Length 13 Header revision: 0 Header pad: 0 Header length: 13 Present flags: 0x00028004 .... .... .... .... .... .... .... ...0 = TSFT: False .... .... .... .... .... .... .... ..0. = Flags: False .... .... .... .... .... .... .... .1.. = Rate: True .... .... .... .... .... .... .... 0... = Channel: False .... .... .... .... .... .... ...0 .... = FHSS: False .... .... .... .... .... .... ..0. .... = DBM Antenna Signal: False .... .... .... .... .... .... .0.. .... = DBM Antenna Noise: False .... .... .... .... .... .... 0... .... = Lock Quality: False .... .... .... .... .... ...0 .... .... = TX Attenuation: False .... .... .... .... .... ..0. .... .... = DB TX Attenuation: False .... .... .... .... .... .0.. .... .... = DBM TX Attenuation: False .... .... .... .... .... 0... .... .... = Antenna: False .... .... .... .... ...0 .... .... .... = DB Antenna Signal: False .... .... .... .... ..0. .... .... .... = DB Antenna Noise: False .... .... .... .... .0.. .... .... .... = RX flags: False .... .... .... .0.. .... .... .... .... = Channel+: False 0... .... .... .... .... .... .... .... = Ext: False Data Rate: 1.0 Mb/s IEEE 802.11 Authentication, Flags: ........ Type/Subtype: Authentication (0x0b) Frame Control: 0x00B0 (Normal) Version: 0 Type: Management frame (0) Subtype: 11 Flags: 0x0 .... ..00 = DS status: Not leaving DS or network is operating in AD-HOC mode (To DS: 0 From DS: 0) (0x00) .... .0.. = More Fragments: This is the last fragment .... 0... = Retry: Frame is not being retransmitted ...0 .... = PWR MGT: STA will stay up ..0. .... = More Data: No data buffered .0.. .... = Protected flag: Data is not protected 0... .... = Order flag: Not strictly ordered Duration: 314 Destination address: CameoCom_f7:33:f5 (00:18:e7:f7:33:f5) Source address: IntelCor_63:57:6c (00:24:d7:63:57:6c) BSS Id: CameoCom_f7:33:f5 (00:18:e7:f7:33:f5) Fragment number: 0 Sequence number: 1405 IEEE 802.11 wireless LAN management frame Fixed parameters (6 bytes) Authentication Algorithm: Open System (0) Authentication SEQ: 0x0001 Status code: Successful (0x0000) 0000 00 00 0d 00 04 80 02 00 02 00 00 00 00 b0 00 3a ...............: 0010 01 00 18 e7 f7 33 f5 00 24 d7 63 57 6c 00 18 e7 .....3..$.cWl... 0020 f7 33 f5 d0 57 00 00 01 00 00 00 .3..W...... ================================================================================ No. Time Source Destination Protocol Info 3587 21:34:38.422280 CameoCom_f7:33:f5 IntelCor_63:57:6c IEEE 802.11 Authentication, SN=3507, FN=0, Flags=........ Frame 3587 (54 bytes on wire, 54 bytes captured) Arrival Time: Dec 6, 2011 21:34:38.422280000 [Time delta from previous captured frame: 0.001060000 seconds] [Time delta from previous displayed frame: 0.001060000 seconds] [Time since reference or first frame: 28.864826000 seconds] Frame Number: 3587 Frame Length: 54 bytes Capture Length: 54 bytes [Frame is marked: False] [Protocols in frame: radiotap:wlan] Radiotap Header v0, Length 24 Header revision: 0 Header pad: 0 Header length: 24 Present flags: 0x0000486e .... .... .... .... .... .... .... ...0 = TSFT: False .... .... .... .... .... .... .... ..1. = Flags: True .... .... .... .... .... .... .... .1.. = Rate: True .... .... .... .... .... .... .... 1... = Channel: True .... .... .... .... .... .... ...0 .... = FHSS: False .... .... .... .... .... .... ..1. .... = DBM Antenna Signal: True .... .... .... .... .... .... .1.. .... = DBM Antenna Noise: True .... .... .... .... .... .... 0... .... = Lock Quality: False .... .... .... .... .... ...0 .... .... = TX Attenuation: False .... .... .... .... .... ..0. .... .... = DB TX Attenuation: False .... .... .... .... .... .0.. .... .... = DBM TX Attenuation: False .... .... .... .... .... 1... .... .... = Antenna: True .... .... .... .... ...0 .... .... .... = DB Antenna Signal: False .... .... .... .... ..0. .... .... .... = DB Antenna Noise: False .... .... .... .... .1.. .... .... .... = RX flags: True .... .... .... .0.. .... .... .... .... = Channel+: False 0... .... .... .... .... .... .... .... = Ext: False Flags: 0x00 .... ...0 = CFP: False .... ..0. = Preamble: Long .... .0.. = WEP: False .... 0... = Fragmentation: False ...0 .... = FCS at end: False ..0. .... = Data Pad: False .0.. .... = Bad FCS: False 0... .... = Short GI: False Data Rate: 1.0 Mb/s Channel frequency: 2412 [BG 1] Channel type: 802.11b (0x00a0) .... .... ...0 .... = Turbo: False .... .... ..1. .... = Complementary Code Keying (CCK): True .... .... .0.. .... = Orthogonal Frequency-Division Multiplexing (OFDM): False .... .... 1... .... = 2 GHz spectrum: True .... ...0 .... .... = 5 GHz spectrum: False .... ..0. .... .... = Passive: False .... .0.. .... .... = Dynamic CCK-OFDM: False .... 0... .... .... = Gaussian Frequency Shift Keying (GFSK): False ...0 .... .... .... = GSM (900MHz): False ..0. .... .... .... = Static Turbo: False .0.. .... .... .... = Half Rate Channel (10MHz Channel Width): False 0... .... .... .... = Quarter Rate Channel (5MHz Channel Width): False SSI Signal: -43 dBm SSI Noise: -127 dBm Antenna: 7 RX flags: 0x0000 .... .... .... .... .... ..0. = Bad PLCP: False IEEE 802.11 Authentication, Flags: ........ Type/Subtype: Authentication (0x0b) Frame Control: 0x00B0 (Normal) Version: 0 Type: Management frame (0) Subtype: 11 Flags: 0x0 .... ..00 = DS status: Not leaving DS or network is operating in AD-HOC mode (To DS: 0 From DS: 0) (0x00) .... .0.. = More Fragments: This is the last fragment .... 0... = Retry: Frame is not being retransmitted ...0 .... = PWR MGT: STA will stay up ..0. .... = More Data: No data buffered .0.. .... = Protected flag: Data is not protected 0... .... = Order flag: Not strictly ordered Duration: 314 Destination address: IntelCor_63:57:6c (00:24:d7:63:57:6c) Source address: CameoCom_f7:33:f5 (00:18:e7:f7:33:f5) BSS Id: CameoCom_f7:33:f5 (00:18:e7:f7:33:f5) Fragment number: 0 Sequence number: 3507 IEEE 802.11 wireless LAN management frame Fixed parameters (6 bytes) Authentication Algorithm: Open System (0) Authentication SEQ: 0x0002 Status code: Successful (0x0000) 0000 00 00 18 00 6e 48 00 00 00 02 6c 09 a0 00 d5 81 ....nH....l..... 0010 07 00 00 00 00 00 00 00 b0 00 3a 01 00 24 d7 63 ..........:..$.c 0020 57 6c 00 18 e7 f7 33 f5 00 18 e7 f7 33 f5 30 db Wl....3.....3.0. 0030 00 00 02 00 00 00 ...... ================================================================================ No. Time Source Destination Protocol Info 3588 21:34:38.423912 IntelCor_63:57:6c CameoCom_f7:33:f5 IEEE 802.11 Association Request, SN=1406, FN=0, Flags=........, SSID="Forty-Two" Frame 3588 (127 bytes on wire, 127 bytes captured) Arrival Time: Dec 6, 2011 21:34:38.423912000 [Time delta from previous captured frame: 0.001632000 seconds] [Time delta from previous displayed frame: 0.001632000 seconds] [Time since reference or first frame: 28.866458000 seconds] Frame Number: 3588 Frame Length: 127 bytes Capture Length: 127 bytes [Frame is marked: False] [Protocols in frame: radiotap:wlan] Radiotap Header v0, Length 13 Header revision: 0 Header pad: 0 Header length: 13 Present flags: 0x00028004 .... .... .... .... .... .... .... ...0 = TSFT: False .... .... .... .... .... .... .... ..0. = Flags: False .... .... .... .... .... .... .... .1.. = Rate: True .... .... .... .... .... .... .... 0... = Channel: False .... .... .... .... .... .... ...0 .... = FHSS: False .... .... .... .... .... .... ..0. .... = DBM Antenna Signal: False .... .... .... .... .... .... .0.. .... = DBM Antenna Noise: False .... .... .... .... .... .... 0... .... = Lock Quality: False .... .... .... .... .... ...0 .... .... = TX Attenuation: False .... .... .... .... .... ..0. .... .... = DB TX Attenuation: False .... .... .... .... .... .0.. .... .... = DBM TX Attenuation: False .... .... .... .... .... 0... .... .... = Antenna: False .... .... .... .... ...0 .... .... .... = DB Antenna Signal: False .... .... .... .... ..0. .... .... .... = DB Antenna Noise: False .... .... .... .... .0.. .... .... .... = RX flags: False .... .... .... .0.. .... .... .... .... = Channel+: False 0... .... .... .... .... .... .... .... = Ext: False Data Rate: 1.0 Mb/s IEEE 802.11 Association Request, Flags: ........ Type/Subtype: Association Request (0x00) Frame Control: 0x0000 (Normal) Version: 0 Type: Management frame (0) Subtype: 0 Flags: 0x0 .... ..00 = DS status: Not leaving DS or network is operating in AD-HOC mode (To DS: 0 From DS: 0) (0x00) .... .0.. = More Fragments: This is the last fragment .... 0... = Retry: Frame is not being retransmitted ...0 .... = PWR MGT: STA will stay up ..0. .... = More Data: No data buffered .0.. .... = Protected flag: Data is not protected 0... .... = Order flag: Not strictly ordered Duration: 314 Destination address: CameoCom_f7:33:f5 (00:18:e7:f7:33:f5) Source address: IntelCor_63:57:6c (00:24:d7:63:57:6c) BSS Id: CameoCom_f7:33:f5 (00:18:e7:f7:33:f5) Fragment number: 0 Sequence number: 1406 IEEE 802.11 wireless LAN management frame Fixed parameters (4 bytes) Capability Information: 0x0431 .... .... .... ...1 = ESS capabilities: Transmitter is an AP .... .... .... ..0. = IBSS status: Transmitter belongs to a BSS .... ..0. .... 00.. = CFP participation capabilities: No point coordinator at AP (0x0000) .... .... ...1 .... = Privacy: AP/STA can support WEP .... .... ..1. .... = Short Preamble: Short preamble allowed .... .... .0.. .... = PBCC: PBCC modulation not allowed .... .... 0... .... = Channel Agility: Channel agility not in use .... ...0 .... .... = Spectrum Management: dot11SpectrumManagementRequired FALSE .... .1.. .... .... = Short Slot Time: Short slot time in use .... 0... .... .... = Automatic Power Save Delivery: apsd not implemented ..0. .... .... .... = DSSS-OFDM: DSSS-OFDM modulation not allowed .0.. .... .... .... = Delayed Block Ack: delayed block ack not implemented 0... .... .... .... = Immediate Block Ack: immediate block ack not implemented Listen Interval: 0x000a Tagged parameters (86 bytes) SSID parameter set Tag Number: 0 (SSID parameter set) Tag length: 9 Tag interpretation: Forty-Two: "Forty-Two" Supported Rates: 1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 Tag Number: 1 (Supported Rates) Tag length: 8 Tag interpretation: Supported rates: 1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 [Mbit/sec] Extended Supported Rates: 24.0 36.0 48.0 54.0 Tag Number: 50 (Extended Supported Rates) Tag length: 4 Tag interpretation: Supported rates: 24.0 36.0 48.0 54.0 [Mbit/sec] RSN Information Tag Number: 48 (RSN Information) Tag length: 20 Tag interpretation: RSN IE, version 1 Tag interpretation: Multicast cipher suite: AES (CCM) Tag interpretation: # of unicast cipher suites: 1 Tag interpretation: Unicast cipher suite 1: AES (CCM) Tag interpretation: # of auth key management suites: 1 Tag interpretation: auth key management suite 1: PSK RSN Capabilities: 0x0000 .... .... .... ...0 = RSN Pre-Auth capabilities: Transmitter does not support pre-authentication .... .... .... ..0. = RSN No Pairwise capabilities: Transmitter can support WEP default key 0 simultaneously with Pairwise key .... .... .... 00.. = RSN PTKSA Replay Counter capabilities: 1 replay counter per PTKSA/GTKSA/STAKeySA (0x0000) .... .... ..00 .... = RSN GTKSA Replay Counter capabilities: 1 replay counter per PTKSA/GTKSA/STAKeySA (0x0000) Vendor Specific: Microsof: WME Tag Number: 221 (Vendor Specific) Tag length: 7 Vendor: Microsof Tag interpretation: WME IE: type 2, subtype 0, version 1, parameter set 0 HT Capabilities (802.11n D1.10) Tag Number: 45 (HT Capabilities (802.11n D1.10)) Tag length: 26 HT Capabilities Info: 0x087e .... .... .... ...0 = HT LDPC coding capability: Transmitter does not support receiving LDPC coded packets .... .... .... ..1. = HT Support channel width: Transmitter supports 20MHz and 40MHz operation .... .... .... 11.. = HT SM Power Save: SM Power Save disabled (0x0003) .... .... ...1 .... = HT Green Field: Transmitter is able to receive PPDUs with Green Field (GF) preamble .... .... ..1. .... = HT Short GI for 20MHz: Supported .... .... .1.. .... = HT Short GI for 40MHz: Supported .... .... 0... .... = HT Tx STBC: Not supported .... ..00 .... .... = HT Rx STBC: No Rx STBC support (0x0000) .... .0.. .... .... = HT Delayed Block ACK: Transmitter does not support HT-Delayed BlockAck .... 1... .... .... = HT Max A-MSDU length: 7935 bytes ...0 .... .... .... = HT DSSS/CCK mode in 40MHz: Won't/Can't use of DSSS/CCK in 40 MHz ..0. .... .... .... = HT PSMP Support: Won't/Can't support PSMP operation .0.. .... .... .... = HT Forty MHz Intolerant: Use of 40 MHz transmissions unrestricted/allowed 0... .... .... .... = HT L-SIG TXOP Protection support: Not supported A-MPDU Parameters: 0x0017 .... ..11 = Maximum Rx A-MPDU Length: 65535 [Bytes] ...1 01.. = MPDU Density: 4 [usec] (0x05) 000. .... = Reserved: 0x00 Rx Supported Modulation and Coding Scheme Set: MCS Set Tag interpretation: Rx Modulation and Coding Scheme (One bit per modulation) .... .... .... .... .... .... 1111 1111 = Rx Bitmask Bits 0-7: 0x000000ff .... .... .... .... 1111 1111 .... .... = Rx Bitmask Bits 8-15: 0x000000ff .... .... 1111 1111 .... .... .... .... = Rx Bitmask Bits 16-23: 0x000000ff 0000 0000 .... .... .... .... .... .... = Rx Bitmask Bits 24-31: 0x00000000 .... .... .... .... .... .... .... ...1 = Rx Bitmask Bit 32: 0x00000001 .... .... .... .... .... .... .000 000. = Rx Bitmask Bits 33-38: 0x00000000 .... .... ...0 0000 0000 0000 0... .... = Rx Bitmask Bits 39-52: 0x00000000 ...0 0000 0000 0000 0000 0000 000. .... = Rx Bitmask Bits 53-76: 0x00000000 Highest Supported Data Rate: 0x01C2 .... .... .... ...1 = Tx Supported MCS Set: Defined .... .... .... ..0. = Tx and Rx MCS Set: Equal .... .... .... 00.. = Tx Maximum Number of Spatial Streams Supported: 1 spatial stream (0x0000) .... .... ...0 .... = Unequal Modulation: Not supported HT Extended Capabilities: 0x0000 .... .... .... ...0 = Transmitter supports PCO: Not supported .... .... .... .00. = Time needed to transition between 20MHz and 40MHz: No Transition (0x0000) .... ..00 .... .... = MCS Feedback capability: STA does not provide MCS feedback (0x0000) .... .0.. .... .... = High Throughput: Not supported .... 0... .... .... = Reverse Direction Responder: Not supported Transmit Beam Forming (TxBF) Capabilities: 0x0000 .... .... .... .... .... .... .... ...0 = Transmit Beamforming: Not supported .... .... .... .... .... .... .... ..0. = Receive Staggered Sounding: Not supported .... .... .... .... .... .... .... .0.. = Transmit Staggered Sounding: Not supported .... .... .... .... .... .... .... 0... = Receive Null Data packet (NDP): Not supported .... .... .... .... .... .... ...0 .... = Transmit Null Data packet (NDP): Not supported .... .... .... .... .... .... ..0. .... = Implicit TxBF capable: Not supported .... .... .... .... .... .... 00.. .... = Calibration: incapable (0x00000000) .... .... .... .... .... ...0 .... .... = STA can apply TxBF using CSI explicit feedback: Not supported .... .... .... .... .... ..0. .... .... = STA can apply TxBF using uncompressed beamforming feedback matrix: Not supported .... .... .... .... .... .0.. .... .... = STA can apply TxBF using compressed beamforming feedback matrix: Not supported .... .... .... .... ...0 0... .... .... = Receiver can return explicit CSI feedback: not supported (0x00000000) .... .... .... .... .00. .... .... .... = Receiver can return explicit uncompressed Beamforming Feedback Matrix: not supported (0x00000000) .... .... .... ...0 0... .... .... .... = STA can compress and use compressed Beamforming Feedback Matrix: not supported (0x00000000) .... .... .... .00. .... .... .... .... = Minimal grouping used for explicit feedback reports: No grouping supported (0x00000000) .... .... ...0 0... .... .... .... .... = Max antennae STA can support when CSI feedback required: 1 TX antenna sounding (0x00000000) .... .... .00. .... .... .... .... .... = Max antennae STA can support when uncompressed Beamforming feedback required: 1 TX antenna sounding (0x00000000) .... ...0 0... .... .... .... .... .... = Max antennae STA can support when compressed Beamforming feedback required: 1 TX antenna sounding (0x00000000) .... .00. .... .... .... .... .... .... = Maximum number of rows of CSI explicit feedback: 1 row of CSI (0x00000000) ...0 0... .... .... .... .... .... .... = Maximum number of space time streams for which channel dimensions can be simultaneously estimated: 1 space time stream (0x00000000) 000. .... .... .... .... .... .... .... = Reserved: 0x00000000 Antenna Selection (ASEL) Capabilities: 0x00 .... ...0 = Antenna Selection Capable: Not supported .... ..0. = Explicit CSI Feedback Based Tx ASEL: Not supported .... .0.. = Antenna Indices Feedback Based Tx ASEL: Not supported .... 0... = Explicit CSI Feedback: Not supported ...0 .... = Antenna Indices Feedback: Not supported ..0. .... = Rx ASEL: Not supported .0.. .... = Tx Sounding PPDUs: Not supported 0... .... = Reserved: 0x00 0000 00 00 0d 00 04 80 02 00 02 00 00 00 00 00 00 3a ...............: 0010 01 00 18 e7 f7 33 f5 00 24 d7 63 57 6c 00 18 e7 .....3..$.cWl... 0020 f7 33 f5 e0 57 31 04 0a 00 00 09 46 6f 72 74 79 .3..W1.....Forty 0030 2d 54 77 6f 01 08 02 04 0b 16 0c 12 18 24 32 04 -Two.........$2. 0040 30 48 60 6c 30 14 01 00 00 0f ac 04 01 00 00 0f 0H`l0........... 0050 ac 04 01 00 00 0f ac 02 00 00 dd 07 00 50 f2 02 .............P.. 0060 00 01 00 2d 1a 7e 08 17 ff ff ff 00 01 00 00 00 ...-.~.......... 0070 00 00 c2 01 01 00 00 00 00 00 00 00 00 00 00 ............... ================================================================================ No. Time Source Destination Protocol Info 3589 21:34:38.425677 CameoCom_f7:33:f5 IntelCor_63:57:6c IEEE 802.11 Association Response, SN=3508, FN=0, Flags=........ Frame 3589 (148 bytes on wire, 148 bytes captured) Arrival Time: Dec 6, 2011 21:34:38.425677000 [Time delta from previous captured frame: 0.001765000 seconds] [Time delta from previous displayed frame: 0.001765000 seconds] [Time since reference or first frame: 28.868223000 seconds] Frame Number: 3589 Frame Length: 148 bytes Capture Length: 148 bytes [Frame is marked: False] [Protocols in frame: radiotap:wlan] Radiotap Header v0, Length 24 Header revision: 0 Header pad: 0 Header length: 24 Present flags: 0x0000486e .... .... .... .... .... .... .... ...0 = TSFT: False .... .... .... .... .... .... .... ..1. = Flags: True .... .... .... .... .... .... .... .1.. = Rate: True .... .... .... .... .... .... .... 1... = Channel: True .... .... .... .... .... .... ...0 .... = FHSS: False .... .... .... .... .... .... ..1. .... = DBM Antenna Signal: True .... .... .... .... .... .... .1.. .... = DBM Antenna Noise: True .... .... .... .... .... .... 0... .... = Lock Quality: False .... .... .... .... .... ...0 .... .... = TX Attenuation: False .... .... .... .... .... ..0. .... .... = DB TX Attenuation: False .... .... .... .... .... .0.. .... .... = DBM TX Attenuation: False .... .... .... .... .... 1... .... .... = Antenna: True .... .... .... .... ...0 .... .... .... = DB Antenna Signal: False .... .... .... .... ..0. .... .... .... = DB Antenna Noise: False .... .... .... .... .1.. .... .... .... = RX flags: True .... .... .... .0.. .... .... .... .... = Channel+: False 0... .... .... .... .... .... .... .... = Ext: False Flags: 0x00 .... ...0 = CFP: False .... ..0. = Preamble: Long .... .0.. = WEP: False .... 0... = Fragmentation: False ...0 .... = FCS at end: False ..0. .... = Data Pad: False .0.. .... = Bad FCS: False 0... .... = Short GI: False Data Rate: 1.0 Mb/s Channel frequency: 2412 [BG 1] Channel type: 802.11b (0x00a0) .... .... ...0 .... = Turbo: False .... .... ..1. .... = Complementary Code Keying (CCK): True .... .... .0.. .... = Orthogonal Frequency-Division Multiplexing (OFDM): False .... .... 1... .... = 2 GHz spectrum: True .... ...0 .... .... = 5 GHz spectrum: False .... ..0. .... .... = Passive: False .... .0.. .... .... = Dynamic CCK-OFDM: False .... 0... .... .... = Gaussian Frequency Shift Keying (GFSK): False ...0 .... .... .... = GSM (900MHz): False ..0. .... .... .... = Static Turbo: False .0.. .... .... .... = Half Rate Channel (10MHz Channel Width): False 0... .... .... .... = Quarter Rate Channel (5MHz Channel Width): False SSI Signal: -45 dBm SSI Noise: -127 dBm Antenna: 7 RX flags: 0x0000 .... .... .... .... .... ..0. = Bad PLCP: False IEEE 802.11 Association Response, Flags: ........ Type/Subtype: Association Response (0x01) Frame Control: 0x0010 (Normal) Version: 0 Type: Management frame (0) Subtype: 1 Flags: 0x0 .... ..00 = DS status: Not leaving DS or network is operating in AD-HOC mode (To DS: 0 From DS: 0) (0x00) .... .0.. = More Fragments: This is the last fragment .... 0... = Retry: Frame is not being retransmitted ...0 .... = PWR MGT: STA will stay up ..0. .... = More Data: No data buffered .0.. .... = Protected flag: Data is not protected 0... .... = Order flag: Not strictly ordered Duration: 314 Destination address: IntelCor_63:57:6c (00:24:d7:63:57:6c) Source address: CameoCom_f7:33:f5 (00:18:e7:f7:33:f5) BSS Id: CameoCom_f7:33:f5 (00:18:e7:f7:33:f5) Fragment number: 0 Sequence number: 3508 IEEE 802.11 wireless LAN management frame Fixed parameters (6 bytes) Capability Information: 0x0411 .... .... .... ...1 = ESS capabilities: Transmitter is an AP .... .... .... ..0. = IBSS status: Transmitter belongs to a BSS .... ..0. .... 00.. = CFP participation capabilities: No point coordinator at AP (0x0000) .... .... ...1 .... = Privacy: AP/STA can support WEP .... .... ..0. .... = Short Preamble: Short preamble not allowed .... .... .0.. .... = PBCC: PBCC modulation not allowed .... .... 0... .... = Channel Agility: Channel agility not in use .... ...0 .... .... = Spectrum Management: dot11SpectrumManagementRequired FALSE .... .1.. .... .... = Short Slot Time: Short slot time in use .... 0... .... .... = Automatic Power Save Delivery: apsd not implemented ..0. .... .... .... = DSSS-OFDM: DSSS-OFDM modulation not allowed .0.. .... .... .... = Delayed Block Ack: delayed block ack not implemented 0... .... .... .... = Immediate Block Ack: immediate block ack not implemented Status code: Successful (0x0000) Association ID: 0x0001 Tagged parameters (94 bytes) Supported Rates: 1.0(B) 2.0(B) 5.5(B) 11.0(B) 6.0 9.0 12.0 18.0 Tag Number: 1 (Supported Rates) Tag length: 8 Tag interpretation: Supported rates: 1.0(B) 2.0(B) 5.5(B) 11.0(B) 6.0 9.0 12.0 18.0 [Mbit/sec] Extended Supported Rates: 24.0 36.0 48.0 54.0 Tag Number: 50 (Extended Supported Rates) Tag length: 4 Tag interpretation: Supported rates: 24.0 36.0 48.0 54.0 [Mbit/sec] HT Capabilities (802.11n D1.10) Tag Number: 45 (HT Capabilities (802.11n D1.10)) Tag length: 26 HT Capabilities Info: 0x11cc .... .... .... ...0 = HT LDPC coding capability: Transmitter does not support receiving LDPC coded packets .... .... .... ..0. = HT Support channel width: Transmitter only supports 20MHz operation .... .... .... 11.. = HT SM Power Save: SM Power Save disabled (0x0003) .... .... ...0 .... = HT Green Field: Transmitter is not able to receive PPDUs with Green Field (GF) preamble .... .... ..0. .... = HT Short GI for 20MHz: Not supported .... .... .1.. .... = HT Short GI for 40MHz: Supported .... .... 1... .... = HT Tx STBC: Supported .... ..01 .... .... = HT Rx STBC: Rx support of one spatial stream (0x0001) .... .0.. .... .... = HT Delayed Block ACK: Transmitter does not support HT-Delayed BlockAck .... 0... .... .... = HT Max A-MSDU length: 3839 bytes ...1 .... .... .... = HT DSSS/CCK mode in 40MHz: Will/Can use DSSS/CCK in 40 MHz ..0. .... .... .... = HT PSMP Support: Won't/Can't support PSMP operation .0.. .... .... .... = HT Forty MHz Intolerant: Use of 40 MHz transmissions unrestricted/allowed 0... .... .... .... = HT L-SIG TXOP Protection support: Not supported A-MPDU Parameters: 0x001b .... ..11 = Maximum Rx A-MPDU Length: 65535 [Bytes] ...1 10.. = MPDU Density: 8 [usec] (0x06) 000. .... = Reserved: 0x00 Rx Supported Modulation and Coding Scheme Set: MCS Set Tag interpretation: Rx Modulation and Coding Scheme (One bit per modulation) .... .... .... .... .... .... 1111 1111 = Rx Bitmask Bits 0-7: 0x000000ff .... .... .... .... 1111 1111 .... .... = Rx Bitmask Bits 8-15: 0x000000ff .... .... 0000 0000 .... .... .... .... = Rx Bitmask Bits 16-23: 0x00000000 0000 0000 .... .... .... .... .... .... = Rx Bitmask Bits 24-31: 0x00000000 .... .... .... .... .... .... .... ...0 = Rx Bitmask Bit 32: 0x00000000 .... .... .... .... .... .... .000 000. = Rx Bitmask Bits 33-38: 0x00000000 .... .... ...0 0000 0000 0000 0... .... = Rx Bitmask Bits 39-52: 0x00000000 ...0 0000 0000 0000 0000 0000 000. .... = Rx Bitmask Bits 53-76: 0x00000000 Highest Supported Data Rate: 0x0000 .... .... .... ...1 = Tx Supported MCS Set: Defined .... .... .... ..0. = Tx and Rx MCS Set: Equal .... .... .... 00.. = Tx Maximum Number of Spatial Streams Supported: 1 spatial stream (0x0000) .... .... ...0 .... = Unequal Modulation: Not supported HT Extended Capabilities: 0x0000 .... .... .... ...0 = Transmitter supports PCO: Not supported .... .... .... .00. = Time needed to transition between 20MHz and 40MHz: No Transition (0x0000) .... ..00 .... .... = MCS Feedback capability: STA does not provide MCS feedback (0x0000) .... .0.. .... .... = High Throughput: Not supported .... 0... .... .... = Reverse Direction Responder: Not supported Transmit Beam Forming (TxBF) Capabilities: 0x0000 .... .... .... .... .... .... .... ...0 = Transmit Beamforming: Not supported .... .... .... .... .... .... .... ..0. = Receive Staggered Sounding: Not supported .... .... .... .... .... .... .... .0.. = Transmit Staggered Sounding: Not supported .... .... .... .... .... .... .... 0... = Receive Null Data packet (NDP): Not supported .... .... .... .... .... .... ...0 .... = Transmit Null Data packet (NDP): Not supported .... .... .... .... .... .... ..0. .... = Implicit TxBF capable: Not supported .... .... .... .... .... .... 00.. .... = Calibration: incapable (0x00000000) .... .... .... .... .... ...0 .... .... = STA can apply TxBF using CSI explicit feedback: Not supported .... .... .... .... .... ..0. .... .... = STA can apply TxBF using uncompressed beamforming feedback matrix: Not supported .... .... .... .... .... .0.. .... .... = STA can apply TxBF using compressed beamforming feedback matrix: Not supported .... .... .... .... ...0 0... .... .... = Receiver can return explicit CSI feedback: not supported (0x00000000) .... .... .... .... .00. .... .... .... = Receiver can return explicit uncompressed Beamforming Feedback Matrix: not supported (0x00000000) .... .... .... ...0 0... .... .... .... = STA can compress and use compressed Beamforming Feedback Matrix: not supported (0x00000000) .... .... .... .00. .... .... .... .... = Minimal grouping used for explicit feedback reports: No grouping supported (0x00000000) .... .... ...0 0... .... .... .... .... = Max antennae STA can support when CSI feedback required: 1 TX antenna sounding (0x00000000) .... .... .00. .... .... .... .... .... = Max antennae STA can support when uncompressed Beamforming feedback required: 1 TX antenna sounding (0x00000000) .... ...0 0... .... .... .... .... .... = Max antennae STA can support when compressed Beamforming feedback required: 1 TX antenna sounding (0x00000000) .... .00. .... .... .... .... .... .... = Maximum number of rows of CSI explicit feedback: 1 row of CSI (0x00000000) ...0 0... .... .... .... .... .... .... = Maximum number of space time streams for which channel dimensions can be simultaneously estimated: 1 space time stream (0x00000000) 000. .... .... .... .... .... .... .... = Reserved: 0x00000000 Antenna Selection (ASEL) Capabilities: 0x00 .... ...0 = Antenna Selection Capable: Not supported .... ..0. = Explicit CSI Feedback Based Tx ASEL: Not supported .... .0.. = Antenna Indices Feedback Based Tx ASEL: Not supported .... 0... = Explicit CSI Feedback: Not supported ...0 .... = Antenna Indices Feedback: Not supported ..0. .... = Rx ASEL: Not supported .0.. .... = Tx Sounding PPDUs: Not supported 0... .... = Reserved: 0x00 HT Information (802.11n D1.10) Tag Number: 61 (HT Information (802.11n D1.10)) Tag length: 22 Primary Channel: 1 HT Information Subset (1 of 3): 0x00 .... ..00 = Secondary channel offset: No secondary channel (0x00) .... .0.. = Supported channel width: 20 MHz channel width only .... 0... = Reduced Interframe Spacing (RIFS): Prohibited ...0 .... = Power Save Multi-Poll (PSMP) stations only: Association requests are accepted regardless of PSMP capability 000. .... = Shortest service interval: 5 ms (0x00) HT Information Subset (2 of 3): 0x0000 .... .... .... ..00 = Operating mode of BSS: All STAs are - 20/40 MHz HT or in a 20/40 MHz BSS or are 20 MHz HT in a 20 MHz BSS (0x0000) .... .... .... .0.. = Non-greenfield STAs present: All associated STAs are greenfield capable .... .... .... 0... = Transmit burst limit: No limit .... .... ...0 .... = OBSS non-HT STAs present: Use of protection for non-HT STAs by overlapping BSSs is not needed 0000 0000 000. .... = Reserved: 0x0000 HT Information Subset (3 of 3): 0x0000 .... .... ..00 0000 = Reserved: 0x0000 .... .... .0.. .... = Dual beacon: No second beacon is transmitted .... .... 0... .... = Dual Clear To Send (CTS) protection: Not required .... ...0 .... .... = Beacon ID: Primary beacon .... ..0. .... .... = L-SIG TXOP Protection Full Support: One or more HT STAs in the BSS do not support L-SIG TXOP protection .... .0.. .... .... = Phased Coexistence Operation (PCO): Inactive .... 0... .... .... = Phased Coexistence Operation (PCO) Phase: Switch to or continue 20 MHz phase 0000 .... .... .... = Reserved: 0x0000 Rx Supported Modulation and Coding Scheme Set: Basic MCS Set Tag interpretation: Rx Modulation and Coding Scheme (One bit per modulation) .... .... .... .... .... .... 0000 0000 = Rx Bitmask Bits 0-7: 0x00000000 .... .... .... .... 0000 0000 .... .... = Rx Bitmask Bits 8-15: 0x00000000 .... .... 0000 0000 .... .... .... .... = Rx Bitmask Bits 16-23: 0x00000000 0000 0000 .... .... .... .... .... .... = Rx Bitmask Bits 24-31: 0x00000000 .... .... .... .... .... .... .... ...0 = Rx Bitmask Bit 32: 0x00000000 .... .... .... .... .... .... .000 000. = Rx Bitmask Bits 33-38: 0x00000000 .... .... ...0 0000 0000 0000 0... .... = Rx Bitmask Bits 39-52: 0x00000000 ...0 0000 0000 0000 0000 0000 000. .... = Rx Bitmask Bits 53-76: 0x00000000 Highest Supported Data Rate: 0x0000 .... .... .... ...0 = Tx Supported MCS Set: Not Defined .... .... .... ..0. = Tx and Rx MCS Set: Equal .... .... .... 00.. = Tx Maximum Number of Spatial Streams Supported: 1 spatial stream (0x0000) .... .... ...0 .... = Unequal Modulation: Not supported Vendor Specific: Microsof: WME Tag Number: 221 (Vendor Specific) Tag length: 24 Vendor: Microsof Tag interpretation: WME PE: type 2, subtype 1, version 1, parameter set 0 Tag interpretation: WME AC Parameters: ACI 0 (Best Effort), Admission Control not Mandatory, AIFSN 3, ECWmin 4, ECWmax 10, TXOP 0 Tag interpretation: WME AC Parameters: ACI 1 (Background), Admission Control not Mandatory, AIFSN 7, ECWmin 4, ECWmax 10, TXOP 0 Tag interpretation: WME AC Parameters: ACI 2 (Video), Admission Control not Mandatory, AIFSN 2, ECWmin 3, ECWmax 4, TXOP 94 Tag interpretation: WME AC Parameters: ACI 3 (Voice), Admission Control not Mandatory, AIFSN 2, ECWmin 2, ECWmax 3, TXOP 47 0000 00 00 18 00 6e 48 00 00 00 02 6c 09 a0 00 d3 81 ....nH....l..... 0010 07 00 00 00 00 00 00 00 10 00 3a 01 00 24 d7 63 ..........:..$.c 0020 57 6c 00 18 e7 f7 33 f5 00 18 e7 f7 33 f5 40 db Wl....3.....3.@. 0030 11 04 00 00 01 c0 01 08 82 84 8b 96 0c 12 18 24 ...............$ 0040 32 04 30 48 60 6c 2d 1a cc 11 1b ff ff 00 00 00 2.0H`l-......... 0050 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 ................ 0060 00 00 3d 16 01 00 00 00 00 00 00 00 00 00 00 00 ..=............. 0070 00 00 00 00 00 00 00 00 00 00 dd 18 00 50 f2 02 .............P.. 0080 01 01 00 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 ........'...BC^. 0090 62 32 2f 00 b2/.